Zitrec - Products

Our products consist of 2 main components :

1. The base-fluid : defines the physical properties like freezing and boiling point, the viscosity, the density, etc...
2. The corrosion inhibitors : which are responsible for corrosion protection of the various metals.

Heat-transfer fluids should not be confused with refrigerants like ammonia, CFC, HFC or hydrocarbons. These refrigerants are used in the primary circuit. Heat-transfer fluids are not suitable for temperatures above 200°C. Mineral oils or synthetic oils like silicone oils are more suitable for high temperature applications.

Arteco's heat transfer-fluid product range consists of the following products :

Zitrec S an organic heat transfer fluid based on a matrix of potassium formate
and sodium propionate
Freezium an organic heat-transfer fluid based on pure potassium formate
Zitrec F an USP MPG-based heat transfer fluid using FDA approved ingredients
Zitrec L an industrial MPG-based heat transfer fluid with organic inhibitors
Zitrec M an MEG-based heat transfer fluid with organic inhibitors
Zitrec A an aqueous heat transfer fluid containing organic inhibitors with no
freezing protection added

For assistance and advice on installation requirements, please check our Engineering Guidelines.

Click on the following links for more info on the compatibility of our HTF's with polymers and elastomers :
Elastomer Compatibility - English

Testimonials from our customers:
    Danisco chooses Zitrec F
    Lyondell chooses Zitrec L
    Swiss cheese craftmanship supported by Zitrec L
    Bayer Cropscience UK goes for Freezium

For other languages, click here.